Please read these instructions and warranty disclosures completely before proceeding to installation! Always transport and store product cartons carefully to prevent damage to the flooring inside. Cartons should be stored in a climate controlled environment on a flat surface and not upright on their ends or in areas subject to extreme temperatures, including but not limited to , garages, basements, storage containers, sheds, crawl spaces, or attics.
This inspection should include product color, quality, finish and locking system. Do not continue opening cartons and do not discard cartons that were opened during inspection. Contact your retailer immediately for assistance! Ensure that exterior grading is complete with surface drainage offering a minimum drop of 3" in 10' to direct exterior water sources away from the structure where the flooring will be installed inside.
Crawl spaces should be a minimum of 18" high, insulated per latest building code requirements, with a minimum 6-mil ground cover vapor barrier. Crawl spaces should offer cross-ventilation air vents equivalent to at least 1. Moisture issues must be detected and corrected before installation.
The jobsite should be enclosed and climate controlled. A concrete sealer can be used as another type of protection. When installing the 6-mil poly film, it should be overlapped 6 to 8 inches using waterproof tape to seal all seams and extended a few inches up the walls. Improper installation is not covered by the manufacturer warranty. Floor coverings that must be removed prior to installation include: Carpet, needle felt, cushion vinyl, floating floors of any kind, parquet, solid and engineered hardwood over concrete, sleeper substrates and pavers with an uneven surface.
Do not install over wood flooring glued to concrete. This includes hydronic water-based systems and electrical resistance systems. It must be noted that the radiant heat system must be embedded into the subfloor typically wood or concrete, or a layer of mortar and cannot be in direct contact with the LVP flooring. Direct contact of the radiant heat system with the LVP flooring will cause damage and void all manufacturer's warranty.
